Foodservice Cutting Boards Buying Guide

Foodservice Cutting Boards Buying Guide

The wrong cutting board slows down prep, dulls knives faster than it should, and in a commercial kitchen can turn into a food-safety problem. The right one matches the material, size and colour-coding to the job and holds up to the cleaning routine you actually run.

This guide walks through cutting board materials, sizing and features, care and storage, and the related display and serving boards built for the front of house rather than the prep line.

Why Use This Guide

Most kitchens end up running several cutting boards at once — a colour-coded set to separate proteins from produce, a heavier board for butchering and portioning, and something smaller for the bar or garnish station. Matching material and size to each job keeps prep moving and makes cleaning between tasks faster.

Caring for your knives too? See our How to Care for Professional Knives guide.

Common Kitchen Needs

Most cutting board decisions come down to how the board will be used and cleaned.

Colour-Coded Prep Butchering Bar & Garnish Dishwasher Use Storage Tableside Serving

Cutting Board Materials

Material drives durability, knife wear and how a board can be cleaned. Russell Hendrix carries high-density poly and colour-coded boards from SignatureWares, San Jamar and Browne; maple boards from Labell, John Boos and Tap Phong; fibrewood boards from SignatureWares; bamboo boards from Joyce Chen; and rubber boards from Happy Mat.

Picking a material

  • High-density poly is dishwasher-safe, non-porous and the most common choice for heavy daily prep.
  • Maple and other hardwoods are gentler on knife edges but need hand washing and periodic oiling.
  • Fibrewood boards are non-porous and heat-resistant, with a wood-like look that works tableside.
  • Rubber boards resist warping in humid environments and are easy on knives, though less common for display.

Poly & Colour-Coded Boards

SignatureWares, San Jamar and Browne boards and sets for separating proteins, produce and allergens.

Wood & Butcher Block

Labell, John Boos and Tap Phong maple boards, including end-grain butcher blocks and edge-grain utility boards.

Fibrewood, Bamboo & Rubber

SignatureWares fibrewood, Joyce Chen bamboo and Happy Mat rubber boards for lighter-duty or tableside use.

Shop Cutting Boards

Compare materials, sizes and colours across the full collection.

Is wood or plastic better for a commercial kitchen?

Both work in a commercial kitchen, and most run both. High-density poly is dishwasher-safe and easiest to sanitize between heavy prep tasks, which is why it's the default for raw protein work. Wood is gentler on knife edges and often preferred for presentation or lighter prep, but needs hand washing and occasional oiling to stay in good condition. Check with your local health authority on any restrictions for wood boards in your kitchen.

Sizing & Features

Board size needs to fit your counter, your sink and your dishwasher — not just the ingredient in front of you. A larger board gives more working room for bulk prep, while a smaller board is easier to carry, wash and store between tasks. Features like handles, juice grooves and non-slip corners add convenience for specific jobs.

What to consider

  • Measure your sink and dishwasher rack before buying a large board — an oversized board that doesn't fit either becomes a cleaning bottleneck.
  • Thickness ranges from about 1/2" to 2" or more; thicker boards resist warping but weigh more to lift and carry.
  • A juice groove around the edge is standard on carving boards and useful for any board used with roasts or whole proteins.
  • Non-slip feet or corners reduce the need for a separate safety mat underneath.

Caring for Your Boards

How a board is cleaned and maintained depends on its material. Poly and rubber boards generally run through the dishwasher, while wood and fibrewood boards need hand washing to avoid warping or delamination. Russell Hendrix carries board care products including John Boos Mystery Oil and Boos Block Board Cream and Labell's cutting board initial treatment solution.

Keep boards in good shape

  • Hand wash wood boards with hot water and mild soap, then dry and store them standing on edge for airflow.
  • Oil wood boards every 2–4 weeks with a food-safe mineral oil or board cream to prevent drying, staining and splitting.
  • Replace a poly board once knife grooves get deep enough to trap bacteria and resist cleaning.
  • Confirm manufacturer dishwasher guidance before running any board through high heat.

Storage & Accessories

Standing boards upright between uses lets them air dry fully and keeps counters clear. Russell Hendrix carries cutting board racks from Vollrath and Browne, and San Jamar Saf-T-Grip safety mats and a stainless cutting board stand for securing a board in place while you work.

What to look for

  • Match a rack's slot count and spacing to the number and thickness of boards you need to store.
  • A non-slip safety mat under a board eliminates slipping on a prep counter without needing a built-in non-slip edge.
  • Vertical storage on a rack dries boards faster and more evenly than stacking them flat.

Storage Racks

Vollrath and Browne racks that hold multiple boards upright for drying and organized storage.

Safety Mats & Stands

San Jamar Saf-T-Grip mats and a stainless cutting board stand to keep a board secure while cutting.

Board Care Products

John Boos oil and board cream, and Labell's initial treatment solution, for conditioning wood boards.

Shop Racks & Accessories

Compare racks, mats and care products in one place.

Display & Serving Boards

Not every board on this list is meant for heavy cutting. Display and serving boards are built for plating and presenting food tableside rather than for repeated prep work. Russell Hendrix carries serving and paddle boards from Cal-Mil, Tableware Solutions, American Metalcraft, Browne, TableCraft, Ironwood and Epicurean, plus Libbey tasting flight boards for multi-glass service.

Choosing a serving board

  • Handled serving boards carry easily from kitchen to table and suit shared plates and charcuterie.
  • Flight boards need compartments sized to match the glasses or cups you're serving.
  • Reserve lighter display boards for presentation — pair them with a proper cutting board for any actual slicing.

How to Choose

Start with how the board will be used and cleaned, then narrow by size and features. Most kitchens are better served by a small set of boards in different materials and colours than by one all-purpose board.

Ask these before buying

  • Will this board go in the dishwasher, or does it need hand washing?
  • Does your kitchen use colour-coding to separate proteins, produce and allergens?
  • Does the board need to fit a specific sink, counter or storage rack?
  • Is this board for prep, or for carrying food to the table?

Choose by Cleaning Method

Dishwasher-safe poly and rubber versus hand-washed wood and fibrewood.

Choose by Task

Colour-coded prep sets, heavier butcher blocks, or smaller bar and garnish boards.

Choose by Destination

A prep board stays in the kitchen; a serving board is built to go to the table.

Browse Cutting Boards

Start building out your board lineup.

Shop Cutting Boards at Russell Hendrix

Russell Hendrix carries cutting boards, storage racks and accessories, board care products, and display and serving boards for every stage from prep to the table. Browse the full range to compare everything in one place, or check our knife care guide to keep the rest of your prep kit in shape.