How to Care for Professional Knives

 

 

 

How to Care for Professional Knives

A sharp knife is safer than a dull one. Dull blades need more pressure to cut, which makes them more likely to slip, and a knife that's stored carelessly puts staff at risk before it ever reaches a cutting board. Keeping a kitchen's knives honed, sharpened, cleaned and stored properly protects both the staff using them and the edge itself.

This guide covers the difference between honing and sharpening, how to clean and store knives safely, and the cutting technique that keeps an edge lasting longer between sharpenings.

Why Use This Guide

Most knife damage and most knife injuries come down to the same few habits: skipping regular honing, sharpening too rarely or incorrectly, washing in a dishwasher, or storing blades loose in a drawer.

Shopping for new knives instead? See our Commercial Chef and Kitchen Knife Buying Guide for blade steel, edge and handle guidance.

Common Care Tasks

Most knife care falls into a handful of recurring habits.

Daily Honing Periodic Sharpening Hand Washing Safe Storage Cutting Board Care Carbon Steel Upkeep

Honing vs. Sharpening

Honing and sharpening are not the same task. Honing realigns a blade's edge, which rolls slightly out of true with ordinary use -- it doesn't remove metal, just straightens what's already there, and is quick enough to do before every shift or even between tasks. Sharpening actually removes metal to create a new edge, and is needed far less often: typically every few weeks to a few months, depending on use.

Most Western-style knives are sharpened to an edge angle of around 20 degrees per side, while Asian-style knives such as santoku, nakiri and gyutoh blades are typically ground to a finer angle closer to 15 degrees. Matching the sharpening angle to the knife's original edge keeps the blade performing as designed.

Quick reference

  • Hone: daily or before each use, with a sharpening steel -- straightens, doesn't remove metal.
  • Sharpen: every few weeks to months, with a stone or sharpener -- removes metal to form a new edge.
  • Western edge angle: around 20° per side.
  • Asian-style edge angle: typically closer to 15° per side.

Sharpening Steels

Honing steels and sharpening steels realign the edge between sharpenings; diamond-coated steels can also remove a small amount of metal.

Sharpening Stones

Whetstones give the most control over edge angle and finish, suited to kitchens with time to sharpen by hand.

Electric & Pull-Through Sharpeners

Faster and more consistent for high-volume sharpening across a full knife kit, at fixed preset angles.

Shop Sharpening & Honing

Compare steels, stones and electric sharpeners in the full collection.

Safe Storage

Loose knives in a drawer are a safety hazard and dull faster from contact with other utensils. Russell Hendrix carries several ways to store knives safely: wall-mounted knife blocks and racks that keep blades visible and accessible, magnetic strips that hold knives by the spine without a sheath, knife rolls and cases for staff who travel between stations or venues, and individual blade guards that slide over a single knife for drawer storage.

Choosing a storage method

  • Knife blocks & racks: keep a full set visible and within reach at a fixed station.
  • Magnetic strips: a wall-mounted option that saves counter space and works for mixed knife sizes.
  • Knife rolls & cases: for cooks who move between stations, catering jobs or venues.
  • Blade guards: slide over an individual blade so it can go in a drawer without exposing the edge.
Storing serrated and specialty blades

Serrated and scalloped blades, like bread knives, can still rest in most racks and blocks, but a magnetic strip works especially well for them since there's no slot shape to match. Individual blade guards are sized by blade length and width, so check a guard's listed dimensions against the knife it needs to fit.

Why loose drawer storage is a problem

An unsheathed knife loose in a drawer can cut whoever reaches in next, and the edge dulls faster from knocking against other utensils. A blade guard or a dedicated rack solves both problems at once.

Cleaning & Care

Professional knives should be hand washed, not run through a dishwasher. Dishwasher heat, detergent and contact with other utensils can dull an edge, pit the blade or damage the handle, even on a stainless knife. Wash by hand with warm water and mild detergent immediately after use, dry the blade fully before putting it away, and never leave a knife to soak or sit wet in a sink.

Carbon steel and higher-carbon stainless blades need extra attention: dry them immediately after washing and consider a light wipe of food-safe oil on the blade if it won't be used again soon, since these steels are more prone to staining and rust than standard stainless.

Cleaning checklist

  • Hand wash, never dishwasher.
  • Dry fully before storing -- don't let a blade air-dry wet.
  • Wipe carbon or higher-carbon steel blades dry immediately.
  • Never leave a knife soaking or submerged in a sink.

Cutting Technique & Board Care

How a knife is used affects how long its edge lasts between sharpenings as much as how it's cleaned and stored. Cutting on a hard surface like glass, stone or metal dulls an edge far faster than a proper cutting board, and using the wrong knife for a task -- twisting a paring knife through a dense squash, for example -- stresses the blade and increases the chance of it slipping.

Good habits

  • Always cut on a wood or food-safe plastic cutting board, never glass, stone or metal.
  • Match the knife to the task rather than forcing one blade to do every job.
  • Keep the blade's edge angle consistent with how it was sharpened when cutting.
  • Hone before each use to keep the edge aligned between sharpenings.

Shop Knife Care & Maintenance at Russell Hendrix

Russell Hendrix carries sharpening steels, stones, electric and pull-through sharpeners, plus knife blocks, magnetic racks, rolls and blade guards for safe storage. Browse both collections to keep your knives sharp and your kitchen safe, or see our Buying Guide if you're shopping for new knives.